Truck Bed LED Lights: No-Wire Installation and Use

Quick answer

Battery-powered truck bed LED lights let you add bright illumination in minutes without tapping into your truck's electrical system. The Armordillo® Truck Bed LED Lighting Kit (AA battery, no wiring required) is a universal-fit solution that works with or without a tonneau cover.

Step-by-step installation and use

1. 1. Prepare the mounting surface: Clean the area where you'll attach the lights with a mild degreaser or alcohol wipe. A clean surface ensures the adhesive sticks firmly, even in cold weather.
2. 2. Insert AA batteries: Open the battery compartment on each light bar and insert fresh AA batteries. Check polarity markings to avoid reversing them. Common mistake: using old or mismatched batteries can cause dim output. Always use fresh batteries from the same pack.
3. 3. Mount the lights: Peel the backing from the adhesive pads and press each light bar firmly onto the truck bed wall or underside of the tonneau cover. Position them to cast light evenly across the bed floor.
4. 4. Test the operation: Turn on the lights using the built-in switch or remote (if included). Verify that both bars illuminate and that the beam covers your intended work area. Checkpoint: if one light is dimmer, swap batteries between units to isolate a battery issue vs. a light defect.
5. 5. Secure cables (if any): Some kits include a short cable connecting the two bars. Use included clips or zip ties to route the cable along the bed wall so it doesn't snag on cargo.
6. 6. Replace batteries as needed: When lights dim, replace all batteries at once. Keep a spare set in your glove box so you're never left in the dark. Common mistake: mixing old and new batteries reduces runtime and can cause uneven brightness.

Product spotlight

• ARMORDILLO® Truck Bed LED Lights AA Battery (No Wiring Required) Lighting Kit: The Armordillo® Truck Bed LED Lighting Kit delivers bright, even illumination across your truck bed using AA batteries with no wiring required. You can install it in minutes without tools or electrical knowledge, and it works with virtually all truck beds—especially useful if you have a tonneau cover that blocks overhead light.