Honda CRV Modular Roof Rack: Wind Fairing Setup Guide

By Armordillo® | Premium Truck & SUV Accessories – Armordillo4x4 | Published: 2026-11-04

Category: Guias Práticos

Set up your 2017-2022 Honda CRV modular roof rack with a wind fairing. Follow these steps to reduce noise and secure your cargo rack.

Quick answer

Install the modular roof rack first, then attach the wind fairing to the front crossbar to reduce wind noise. Tighten all hardware evenly and check the fit before loading cargo.

Why the wind fairing matters for your CRV

The wind fairing is not just cosmetic. It redirects airflow over the rack and cargo, which can reduce the whistling and rumbling that often comes from an exposed roof rack. Without it, you may notice more noise at highway speeds, especially with a low-profile basket like the Armordillo modular rack.

When to skip the fairing

If you rarely drive above city speeds or always carry bulky cargo that already disrupts airflow, the fairing may offer less benefit. However, for most daily drivers, it is a worthwhile addition to keep the cabin quieter.

Step-by-step installation

Prepare the roof and gather tools: Clean the roof mounting points and confirm you have all hardware, including crossbars, brackets, and the wind fairing. Common mistake: forgetting to remove the protective film from the fairing before installation. A clean surface prevents scratches and ensures a proper seal.
Assemble the modular rack: Follow the rack's instructions to assemble the frame and crossbars loosely. Do not fully tighten yet. Checkpoint: ensure all parts are oriented correctly and the rack sits level on the roof. Loose assembly allows adjustments before final tightening.
Mount the rack to the roof: Position the rack on the mounting points and hand-tighten the brackets. Common mistake: over-tightening one side before the other, which can cause misalignment. Tighten in a crisscross pattern to distribute pressure evenly.
Attach the wind fairing: Secure the fairing to the front crossbar using the provided hardware. Adjust the angle so it deflects air upward. Checkpoint: the fairing should not touch the roof or interfere with the sunroof. A small gap between fairing and roof reduces vibration.
Final tighten and test: Fully tighten all hardware, then push and pull the rack to check for movement. Common mistake: skipping a test drive. Drive slowly at first and listen for unusual noises. Re-torque hardware after the first 100 miles of driving.

Product facts

ARMORDILLO® 2017-2022 Honda CRV Modular Roof Rack w/ Wind Fairing: Engineered specifically for 2017-2022 Honda CRV models, this light-duty steel roof rack provides secure rooftop storage with a clean, low-profile appearance. The model-specific fit means you get a rack that mounts directly to your CRV's roof without universal adapters, simplifying installation and ensuring a stable base for the fairing.
ARMORDILLO® 2017-2022 Honda CRV Modular Roof Rack w/ Wind Fairing