What the CoveRex Inflatable Topper Is and What It Fits
The Armordillo CoveRex Inflatable Truck Bed Camper Topper is a drop-stitch inflatable system that turns your truck bed into a rigid, enclosed space when you need it and deflates into a compact storage bag when you don't. Unlike a permanent fiberglass shell, this topper installs without drilling and uses the truck's existing bed rails.
The CoveRex v1 is designed specifically for the 2016-2026 Nissan Titan with a 5'5" bed. It is not compatible with models that have the factory Titan Box (OEM storage box). Before you begin, confirm your truck's bed length and that no Titan Box is present.
CoveRex Topper Key Specs
- ARMORDILLO® CoveRex 2016-2026 Nissan Titan 5'5" Bed Inflatable Truck Bed Camper Topper v1.: Drop-stitch core construction creates rigid, flat panels when inflated. This is what gives the inflatable topper hard-shell-like strength without permanent weight.

ARMORDILLO® CoveRex 2016-2026 Nissan Titan 5'5" Bed Inflatable Truck Bed Camper Topper v1. - ARMORDILLO® CoveRex 2016-2026 Nissan Titan 5'5" Bed Inflatable Truck Bed Camper Topper v1.: Includes mounting hardware, brackets, and rail system. No drilling required. Installation is bolt-on, so you don't need to modify your truck bed or drill holes.
- ARMORDILLO® CoveRex 2016-2026 Nissan Titan 5'5" Bed Inflatable Truck Bed Camper Topper v1.: Dimensions: Material Thickness 19.69 in, Overall Height 185.04 in, Internal Height 165.35 in. These measurements help you confirm fit and plan for cargo or camping headroom.
Installation Steps for the CoveRex Inflatable Topper on a Nissan Titan
The supplied information confirms that everything needed for installation and inflation is included in the box. Follow these general steps; always refer to the included manual for torque specs and final fit adjustments.
- 1. Prepare the truck bed: Clean the bed rails and remove any existing bed liner accessories that might interfere with the mounting brackets. Ensure the bed is empty and clear.
- 2. Mount the rail system and brackets: Using the included hardware and brackets, attach the rail system to the bed rails. The kit is designed for a bolt-on fit with no drilling. Tighten fasteners according to the manual.
- 3. Position the deflated topper: Place the CoveRex topper (deflated) onto the bed, aligning its edges with the mounted rails. Make sure the rear clear vinyl window and zip-up mesh window are oriented correctly.
- 4. Inflate the topper: Connect the high-pressure electric pump (included) to the inflation valve. Inflate until the drop-stitch panels become rigid and the topper reaches its full shape. The supplied information does not specify a target pressure or inflation time, so follow the included instructions.
- 5. Secure the topper to the rails: Once inflated, use the remaining hardware to secure the topper to the rail system. This ensures it stays in place during driving. Check all attachment points.
- 6. Final checks: Verify that the topper is centered, the seals are making contact, and the window zippers operate smoothly. Test the D-rings (2 side, 4 roof) for securing gear.
Removal and Storage
When you don't need the topper, deflate it using the pump or valve, disconnect from the rails, and pack it into the included compact storage bag. The entire process is reversible, leaving your truck bed unmodified. The CoveRex is designed for quick transition between enclosed and open bed configurations.


